Skip to main content

Design and Implementation of Interoperable IoT Healthcare System Based on International Standards

Design and Implementation of Interoperable IoT
Healthcare System Based on International Standards

ABSTRACTS
In Internet of Things (IoT) environment, IoT devices are limited to power supply, CPU capacity, memory, etc. and have a constrained network performance such as bandwidth, Wireless channel, throughput, payload, etc., the resources of IoT devices however can be shared by other IoT devices. Specially, in IoT healthcare service, the way of management and interoperability of patient-related and device information are very important.
In this paper, we propose the design and implementation of an IoT healthcare system using ISO/IEEE 11073 PHD (Personal Healthcare Device) standards in order to enhance the interoperability and reduce the data loss between the devices and measured information while in transmission.
To demonstrate the proposed architecture, we implement comparative performance evaluation with IOT system implementation in number of packets in one transaction, the number of packets by data loss rate in during transmission.


 https://drive.google.com/open?id=0Byidi6Tjc1WyMlVjUUJ2dHJGT2M

Comments

Post a Comment

Popular posts from this blog

Jio

Reliance Jio planning its own  cryptocurrency called JioCoin  elder son Akash Ambani leading the JioCoin project, Reliance Jio plans to build a 50-member team of young professionals to work on blockchain technology, which can also be used to develop applications such as smart contracts and supply chain management logistics
Post a Comment
Read more

garbage monitoring using arduino code with gsm

#include <SoftwareSerial.h> #include <LiquidCrystal.h> //LiquidCrystal lcd(7, 6, 5, 4, 3, 2); LiquidCrystal lcd(13, 12, 11, 10, 9, 8); SoftwareSerial mySerial(0,1); #define trigPin 2 #define echoPin 3 #define PIR_sensor 4 #define m11 5 #define m12 6 void setup() {    lcd.begin(16, 2);    lcd.print("    Garbage    ");    Serial.println("garbage ");   lcd.setCursor(0,1);   lcd.print("   Open Close    ");   Serial.println(" open close");   delay(3000);   lcd.clear();   //lcd.print(" ");   delay(2000); mySerial.begin(9600); // Setting the baud rate of GSM Module Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);  pinMode(m11, OUTPUT);   pinMode(m12, OUTPUT);   } void loop() {  readPIR();  pingDist();  SendMessage(); } void pingDist ()   {     long duration, distance;...
Post a Comment
Read more