Skip to main content

linking pan to aadhaar card

linking pan to aadhaar card : simple steps

 linking pan card to aadhaar card  :

 Visit https://incometaxindiaefiling.gov.in/

 STEP1: FIRST LOGIN TO THIS WEBSITE FOR THE TAXPAYERS

 LOGIN https://incometaxindiaefiling.gov.in/






STEP 2:  AFTER CLICK ON LINK NEW PAGE IS OPEN RIGHT SIDE CORNER OF E FILLING THERE IS OPTION OF LINK AADHAR 


STEPS3:

AFTER  ENTERING PAN AND AADHAR CARD NUMBER YOU NEED TO MAKE SURE YOU THAT YOU ENTER THE NAME EXACTLY AS GIVEN IN AADHAR CARD 

ONCE YOU FILL THE DETAILS  CLICK SUBMIT BUTTON.





Comments

Post a Comment

Popular posts from this blog

PUNCHING MACHINE

ACCIDENT AVOIDING SYSTEM FOR PUNCHING MACHINE SYNOPSIS The aim of our project is to take a system-wide approach to preventing the machine accident. The system includes not just the machine and the operator; but rather, it includes everything from the initial design of the machine to the training of everyone that is responsible for any aspect of it, to the documentation of all changes, to regular safety audits and a finally a corporate culture of safety-first. Design is the part of a machine's life where the greatest impact can be made in relation to avoiding accidents. The designer should ensure that the machine is safe to set up and operate, safe to install, safe to maintain, safe to repair, and safe to decommission. Although safe operation is usually at the forefront of a designer's mind, safe maintenance and repair should also be a high priority. Around 50% of fatal accidents involving industrial equipment are associated with maintenance activities, and design...
Post a Comment
Read more

garbage monitoring using arduino code with gsm

#include <SoftwareSerial.h> #include <LiquidCrystal.h> //LiquidCrystal lcd(7, 6, 5, 4, 3, 2); LiquidCrystal lcd(13, 12, 11, 10, 9, 8); SoftwareSerial mySerial(0,1); #define trigPin 2 #define echoPin 3 #define PIR_sensor 4 #define m11 5 #define m12 6 void setup() {    lcd.begin(16, 2);    lcd.print("    Garbage    ");    Serial.println("garbage ");   lcd.setCursor(0,1);   lcd.print("   Open Close    ");   Serial.println(" open close");   delay(3000);   lcd.clear();   //lcd.print(" ");   delay(2000); mySerial.begin(9600); // Setting the baud rate of GSM Module Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);  pinMode(m11, OUTPUT);   pinMode(m12, OUTPUT);   } void loop() {  readPIR();  pingDist();  SendMessage(); } void pingDist ()   {     long duration, distance;...
Post a Comment
Read more