Skip to main content

freedom 251

Ringing Bells says bookings for the Freedom 251 will reopen on Friday. Now that you hopefully know what you are getting into, here are the steps to book your Freedom 251 unit:
  1. Head to the official website freedom251.com.
  2. Click on Buy Now button.
  3. Note that the Ringing Bells is charging Rs. 40 for shipping Freedom 251 to your home so the total you will need to pay is Rs. 291.
  4. Enter your shipping address, accept the terms and conditions and click on Pay Now to proceed to the payment page.

Note that the Freedom 251 cannot be shipped to an address outside India.

Comments

Post a Comment

Popular posts from this blog

PUNCHING MACHINE

ACCIDENT AVOIDING SYSTEM FOR PUNCHING MACHINE SYNOPSIS The aim of our project is to take a system-wide approach to preventing the machine accident. The system includes not just the machine and the operator; but rather, it includes everything from the initial design of the machine to the training of everyone that is responsible for any aspect of it, to the documentation of all changes, to regular safety audits and a finally a corporate culture of safety-first. Design is the part of a machine's life where the greatest impact can be made in relation to avoiding accidents. The designer should ensure that the machine is safe to set up and operate, safe to install, safe to maintain, safe to repair, and safe to decommission. Although safe operation is usually at the forefront of a designer's mind, safe maintenance and repair should also be a high priority. Around 50% of fatal accidents involving industrial equipment are associated with maintenance activities, and design...
Post a Comment
Read more

garbage monitoring using arduino code with gsm

#include <SoftwareSerial.h> #include <LiquidCrystal.h> //LiquidCrystal lcd(7, 6, 5, 4, 3, 2); LiquidCrystal lcd(13, 12, 11, 10, 9, 8); SoftwareSerial mySerial(0,1); #define trigPin 2 #define echoPin 3 #define PIR_sensor 4 #define m11 5 #define m12 6 void setup() {    lcd.begin(16, 2);    lcd.print("    Garbage    ");    Serial.println("garbage ");   lcd.setCursor(0,1);   lcd.print("   Open Close    ");   Serial.println(" open close");   delay(3000);   lcd.clear();   //lcd.print(" ");   delay(2000); mySerial.begin(9600); // Setting the baud rate of GSM Module Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);  pinMode(m11, OUTPUT);   pinMode(m12, OUTPUT);   } void loop() {  readPIR();  pingDist();  SendMessage(); } void pingDist ()   {     long duration, distance;...
Post a Comment
Read more