Skip to main content
EMBEDDED BASED PASSENGER INFOTAINMENT SYSTEM
Abstract – In this paper we report on a system kept stationary at the bus-stand that can effectively help the public to participate in bus transportation facilities to its fullest. A bus that is few meters away from the bus –stand is identified by this passenger infotainment system and the details of that particular bus is provided to the passenger. The bus identification process involves usage of Radio Frequency technology and bus details are announced by Voice and displayed in Liquid Crystal Display (LCD) unit. The summary of current research provides details about the integration between Microcontroller and RF transceiver, LCD display and Voice Announcement.
BLOCK DIAGRAM:








HARDWARE REQUIREMENTS:
·         8051 microcontroller with power supply
·         Battery
·         Voice
·         Rf Tx&Rx
SOFTWARE REQUIREMENTS:
·         Embedded C
·         Keil c compiler



Comments

Post a Comment

Popular posts from this blog

PUNCHING MACHINE

ACCIDENT AVOIDING SYSTEM FOR PUNCHING MACHINE SYNOPSIS The aim of our project is to take a system-wide approach to preventing the machine accident. The system includes not just the machine and the operator; but rather, it includes everything from the initial design of the machine to the training of everyone that is responsible for any aspect of it, to the documentation of all changes, to regular safety audits and a finally a corporate culture of safety-first. Design is the part of a machine's life where the greatest impact can be made in relation to avoiding accidents. The designer should ensure that the machine is safe to set up and operate, safe to install, safe to maintain, safe to repair, and safe to decommission. Although safe operation is usually at the forefront of a designer's mind, safe maintenance and repair should also be a high priority. Around 50% of fatal accidents involving industrial equipment are associated with maintenance activities, and design...
Post a Comment
Read more

garbage monitoring using arduino code with gsm

#include <SoftwareSerial.h> #include <LiquidCrystal.h> //LiquidCrystal lcd(7, 6, 5, 4, 3, 2); LiquidCrystal lcd(13, 12, 11, 10, 9, 8); SoftwareSerial mySerial(0,1); #define trigPin 2 #define echoPin 3 #define PIR_sensor 4 #define m11 5 #define m12 6 void setup() {    lcd.begin(16, 2);    lcd.print("    Garbage    ");    Serial.println("garbage ");   lcd.setCursor(0,1);   lcd.print("   Open Close    ");   Serial.println(" open close");   delay(3000);   lcd.clear();   //lcd.print(" ");   delay(2000); mySerial.begin(9600); // Setting the baud rate of GSM Module Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);  pinMode(m11, OUTPUT);   pinMode(m12, OUTPUT);   } void loop() {  readPIR();  pingDist();  SendMessage(); } void pingDist ()   {     long duration, distance;...
Post a Comment
Read more